Lowepro

New Firmware Update for Panasonic LUMIX Cameras

Panasonic Lumix DMC-ZS100 03
Panasonic Lumix DMC-G7/G70, DMC-GX8, Firmware Version – 2.2

Change log:

  1. New functions are added in Fn button.
    The option “Wireless Setup(Flash)” has been added to [Setting in REC mod] on the [Fn Button Set] of [Custom] menu.
    The option “Wi-Fi” and “LVF/Monitor Switch” have been added to [Setting in PLAY mode] on the [Fn Button Set] of [Custom] menu.

Download


Panasonic Lumix DMC-FZ300, DMC-FZ330, Firmware Version – 2.2
Change log:
  1. New functions are added in Fn button.
    The option “Wireless Setup(Flash)” has been added to [Setting in REC mod] on the [Fn Button Set] of [Custom] menu.
    The option “Wi-Fi” and “LVF/Monitor Switch” have been added to [Setting in PLAY mode] on the [Fn Button Set] of [Custom] menu.
  2. Blurring of objects in movie mode under the following condition is improved.
    *Low Light Condition
    *Image Stabilizer is ON

Download


Panasonic Lumix DMC-TZ100, DMC-TZ101, DMC-TZ110, DMC-ZS100, DMC-ZS110, Firmware Version – 1.1
Change log:
  1. New function is added to change the direction of dial rotation when operating the aperture and shutter speed.
    The option [Rotation(F/SS)] has been added to [Ring/Dial Set] on the [Custom] menu.

Download


Panasonic Lumix DMC-TZ80, DMC-TZ81, DMC-ZS60, Firmware Version – 1.1
Change log:
  1. New function is added to change the direction of dial rotation when operating the aperture and shutter speed.
    The option [Rotation(F/SS)] has been added to [Ring/Dial Set] on the [Custom] menu.
  2. The phenomenon which USB charging rarely doesn’t start is improved.
  3. Blurring of objects in movie mode under the following condition is improved.
    *Low Light Condition
    *Image Stabilizer is ON

 

 

Phase One Expands Blue Ring Lineup with Two Zoom lenses

Blue Ring Zoom Lenses

Phase One, creator of the world’s finest open-platform high-end camera systems and professional imaging software, today added two new Schneider Kreuznach lenses to its comprehensive family of lenses. These two Blue Ring zoom lenses feature impressive front glass elements, with front lens diameters of 63mm and 65mm respectively, delivering edge-to-edge coverage of full frame 645 format. Used on a Phase One XF 100MP system, the lenses are able to take full advantage of the sensor’s resolution; a 100MP capture renders a 100MP image with breathtaking fidelity.

– The Schneider Kreuznach 40-80mm LS f/4.0-5.6 Zoom lens renders ultra sharp resolution on all zoom distances from wide to normal focal length;

– The Schneider Kreuznach 75-150mm LS f/4.0-5.6 Zoom lens delivers great versatility.  It’s preferred for on-location fashion shoots, with a range from normal to telephoto.

Together, these two lenses comprise an effective zoom range from 40mm to 150mm. Each lens is equipped with a zoom lock function on its barrel and is designed to maintain focus position while zooming. They each support flash synchronization up to 1/1600s.  The new built-in electronics permit individual focus calibration when used with the Phase One XF Camera System.

“Creating optics this large with such tight tolerances is quite an achievement, “said Espen Beck, Phase One Senior Product Manager. “A Phase One full frame 100MP medium format sensor is 1.5 times larger than the cropped size 50MP medium format and 2.5 times larger than sensors found in high-end 35mm DSLRs. Capturing the full resolution of a square sensor this size with a round lens and avoiding crop means that the entire lens must be larger, which requires larger movements of individual lens elements while meeting the requisite standards for speed and precision.

“Schneider Kreuznach lenses are designed to deliver the ultimate analogue input to be shaped and refined with the Phase One XF 100MP Camera System and Capture One software.  This design also benefits the Phase One XF 50MP system, which can exploit the ‘sweet spot’ of the lens, producing impeccable results.”

Designed by Schneider Kreuznach and produced by Phase One Japan, Schneider Kreuznach “Blue Ring” zoom lenses are refined with robust, aerial-grade mechanics and manufactured to meet Phase One’s highest quality assurance standards. Their enhanced precision, mechanical build, and look and feel complement the Phase One XF Camera System design.

More Info

Product Photo

Schneider Kreuznach 40-80mm LS f/4.0-5.6

Schneider Kreuznach 75-150mm LS f/4.0-5.6

Sample Image

Schneider Kreuznach 40-80mm LS f4.0-5.6 Sample Image 01

Phase one 75-150mm LS f4.0-5.6 Sample Image

Phase one 75-150mm LS f4.0-5.6 Sample Image 02

Leica Releases Silver APO-Summicron-M 50 mm f/2 ASPH

Leica 50mm f:2 APO-SUMMICRON-M SilverPress Release

“As of today, the Leica APO-Summicron-M 50 mm f/2 ASPH. is now also available in a silver anodized version. Thanks to the perfect interaction of all parameters, from optical design and choice of materials to sophisticated and elaborate manufacturing and finishing, this high-performance lens is considered to be the reference lens amongst standard focal lengths. It impresses with exceptional imaging performance and sharpness that captures and resolves even the finest details.

The APO-Summicron-M 50 mm f/2 ASPH. standard lens is characterized in particular by extremely high contrast rendition from corner to corner of the image at maximum aperture and throughout the aperture range. The utilization of a floating element in its design ensures that this is also maintained to a great extent at close shooting distances. A total of eight lens elements are employed to achieve its exceptional optical performance. Three of these are made from glass types with anomalous partial dispersion to apochromatic correction and two of the others have a high refractive index. The specially formulated glass types employed are based on original developments from the former Leitz glass laboratory. The use of such glasses requires great effort and many years of experience. Thanks to the consistent advancement of optical technologies, processes have since been refined and perfected to achieve the best possible imaging qualities.

As is the case for all other Leica lenses, the Leica APO-Summicron-M 50 mm f/2 ASPH. was designed and developed by Leica optical specialists in Wetzlar and represents the perfect combination of optical and technical expertise. As a particularly reliable product with enduring value with the quality guarantee “Made in Germany”, this lens is manufactured from the finest materials and is assembled completely by hand in an elaborate process. The combination of cutting-edge technologies and painstaking manufacturing procedures guarantees consistently excellent quality.” PDF

Available at : B&H | Adorama

Leica 50mm f/2 APO-SUMMICRON-M Silver

Leica 50mm f/2 APO-SUMMICRON-M Silver

Verticam – Paid Photography Apps Become Free – for iPhone


READ : The Apps mentioned here as Free – are free when this post is written. The Apps for Apples iOS device are made free by the developers, we don’t know how long the apps remain free, unless the developers mention it. Download Quickly if you want them.


Verticam

VerticamNormal Price : $ 1.99
Download Now

This camera app lets you hold your smartphone vertically to take photos and videos of any size.
Since you don’t need to change your phone’s orientation, you can easily take landscape photos and videos with one hand.

To change the size (aspect ratio), you just slide your finger vertically on the screen.
Scene correction and filter effects are reflected in real-time.
You can also shoot silently, so it’s perfect for use in restaurants and other settings where you want to be polite.

Find out first-hand how useful it is to shoot vertically!


2016 iPhone Photography Awards

2016 iPhone Photography AwardThe iPhone Photography Awards (IPPAWARDS) is proud to announce the winners of the 9th Annual Awards. This year’s winners were selected from thousands of entries submitted by iPhone photographers from 139 countries around the world.

The Grand Prize Winner Photographer of the Year Award goes to Siyuan Niu of China for his entry The Man and the Eagle.  First, Second and Third Place Photographers of the Year Awards go to Patryk Kuleta of Poland for his image from his series the Modern Cathedrals, Robin Robertis of the United States for her entry titled She Bends with the Wind and Carolyn Mara Borlenghi of the United States from her series Wonderland.

The 1st, 2nd and 3rd places in 19 categories were awarded to photographers who represented countries around the world including Australia, Brazil, China, Chile, France, Hong Kong, India, Italy, Philippines, Poland, Portugal, Singapore, Spain, Switzerland, Sweden, Taiwan, United Arab Emirates, the United Kingdom and the United States.

View the top winning photographers: Winning Photographers
View the winning photos: Winning Photographs

“This year’s entries contained thousand’s of excellent submissions, presenting quite a challenge for our judges” said IPPAWARDS creator Kenan Aktulun. “It is truly amazing to have so many people from around the world share their experiences, the beauty they see and their personal moments with us.”

The Prizes
The Grand Prize Winner Photographer of the Year Award winner receives an iPad Pro. The First, Second and Third Place Photographer of the Year Award winners will each receive an Apple Watch Sport. The first place winner in each category will be awarded a Gold Bar and the Second and Third place winners will each get a Palladium Bar from the most recognizable private gold mint in the world.

ABOUT IPHONE PHOTOGRAPHY AWARDS
iPhone Photography Awards (IPPAWARDS) is the first and longest running iPhone photography competition. Founded in 2007, IPPAWARDS has been celebrating the creativity of iPhone photographers since the iPhone first began to inspire, excite and engage users worldwide. Every year since then, IPPAWARDS has selected the very best shots among thousands of images submitted by iPhone photographers from more than 130 countries around the world. Winners are selected by esteemed jury members in a multi-step process and The Photographers of the Year are then awarded.

2016 iPhone Photography Award

Ricoh GR II Gets Improved Functionality with New Firmware

Pentax Ricoh GR II 01

Ricoh GR II  Firmware Update, Version 3.00
Change log:
  • Manual focus can be done by using the +/- button as well as the up-down dial.
  • [Flash Button Setting] is added. [Flash] or any one of functions which can be registered to the Fn1, Fn2, and effect buttons can also be assigned to the flash button.
  • [MF Assist Display] is added. There are two options:[On] or [Off].
  • [Level Display] is added. The design of the level indicator can be changed.
  • [Exposure Information Display]] is added. There are two options: [Always] or [Half Press].

More Detail

Download


Available at : Adorama | B&H


 

Nikon COOLPIX S33 – New Firmware Version 1.1

Nikon COOLPIX S33Nikon COOLPIX S33 Firmware Update, Version 1.1
Change log

• Fixed an issue that resulted in the camera interfering with nearby radios and other devices, possibly producing audible noise, when connected to the EH-73P/EH-73PCH charging AC adapter via USB with the battery inserted and the power off. This issue does not occur when the EH-71P/EH-71PCH charging AC adapter is used.

Download


B&H | Amazon | Adorama


Firmware update Improves Focusing of Some Sony Lens

Sony ZEISS® Distagon T* FE 35mm F1.4 ZA

Sony Distagon T* FE 35mm f/1.4 ZA Lens (SEL35F14Z) Firmware Version – 02
Change log:
  • This utility updates the lens system software to version 02 to improve the reliability of the focus position when using the camera for long periods of time continuously in MF mode.

Note: The lens must be attached to a camera to perform this update. The NEX-5, NEX-3, NEX-C3, NEX-VG10, and PXW-FS7 model cameras cannot be used.

Download


Sony FE 35mm F2.8 ZA Carl Zeiss Sonnar T*Sony Carl Zeiss Sonnar T* 35mm F2.8 Lens (SEL35F28Z) Firmware Version – 03
Change log:
  • Improves the reliability of the focus position when using the camera for long periods of time continuously in MF mode
  • Provides the Quick starting function

Note: The lens must be attached to a camera to perform this update. The NEX-5, NEX-3, NEX-C3, NEX-VG10, and PXW-FS7 model cameras cannot be used.

Download


Nikon D3s Firmware Update “A” – 1.03

Nikon D3sNikon D3s Firmware Versions “A” 1.03/“B” 1.02

Change log:

Fixed the following issues:

  • The battery level indicator would on rare occasions flash if the camera was turned on with Clean at shutdown or Clean at startup & shutdown selected for SETUP MENU > Clean image sensor > Clean at startup/shutdown.
  • Two different pictures with the same file number would on rare occasions be recorded to both memory cards if two cards were inserted with Overflow selected for SHOOTING MENU > Slot 2.

Download


Prisma – Free Photography App for iPhone

Prisma
Prisma – Art Filters and Photo Effects for Images, Picture Editor for Instagram
Download Now

Be an artist! Turn your photos into awesome artworks:
– Modern art filters!
– Stunning photo effects
– Fast sharing

Prisma transforms your photos into artworks using the styles of famous artists: Munk, Picasso as well as world famous ornaments and patterns. A unique combination of neural networks and artificial intelligence helps you turn memorable moments into timeless art.


Nikon D500 Firmware Update “C” – 1.02

Nikon D500Nikon D500 Firmware “C” – 1.02

Change log:

  • Addressed an issue that sometimes caused errors with certain UHS-II SD memory cards. As we were able to confirm that these were read errors arising not in the camera but in the cards themselves, we addressed the issue with a work-around that switches temporarily to UHS-I mode when a card-side error occurs in UHS-II mode. The camera switches back to UHS-II mode when turned off and then on again or when the standby timer restarts. Card-side read errors may still occur after the update, albeit very infrequently.

Download

Sony Planar T* FE 50mm F1.4 ZA Lens

Sony Planar T* FE 50mm F1.4 ZAProduct Summary

  • Model Name:  Sony Planar T* FE 50mm F1.4 ZA (model SEL50F14Z)
  • Release Date:July 11, 2016
  • Focus Type: Autofocus / Manual
  • Format : Full Frame / APS-C / Crop Sensor
  • Mounts: Sony E
  • Color: Black
  • Availability: July 2016
  • Price: $1,500
  • Purchase options: B&H

Key features

  • E-Mount Lens/Full-Frame Format
  • Aperture Range: f/1.4 to f/16
  • One AA Element & One Aspherical Element
  • One Extra-Low Dispersion Element
  • Zeiss T* Anti-Reflective Coating
  • Ring Drive Super Sonic Wave Motor System
  • Physical Aperture Ring; De-Click Switch
  • AF/MF Switch; Internal Focus
  • Dust- & Moisture-Resistant Construction
  • Eleven-Blade Circular Diaphragm

Features

This 50mm prime lens features a large F1.4 maximum aperture that offers impressive contrast and outstanding resolution that are hallmarks of the ZEISS® brand. It produces these consistently strong qualities throughout the entirety of the frame – from center to corner – and at all aperture settings, even while shooting wide open at F1.4. The cutting edge optical structure includes high-precision AA (Advanced Aspherical) and ED (Extra-low Dispersion) glass elements that reduce spherical and chromatic aberration, as well as a ZEISS® T* Coating that minimizes flare and ghosting creating the classic ZEISS® clarity. Additionally, its Planar design ensures minimal distortion.

The large F1.4 maximum aperture of the FE 50mm F1.4ZA lens provides a level of brightness and speed that are advantageous for dimly lit indoor shots, night scenes, and portraits, while its 11-bladed circular aperture allows for stunning “bokeh”, or background defocus, in images. The lens also features an aperture ring with an adjustable ON/OFF switch, an AF/MF focus mode switch, and a dust and moisture resistant design¹, further increasing its functionality.

The new lens is also equipped with a ring drive SSM (Super Sonic wave Motor) system, which allows it to efficiently lock focus with speed, precision and in near silence, making it particularly useful for shooting movies.

Product Photos

Sony Planar T FE 50mm F1.4 ZA

Purchase options

B&H

Canon EOS-1D X Mark II Firmware Update Fixes Image Corruption

Canon EOS 1D X Mark IICanon EOS 1D X Mark II Firmware  – 1.0.2

Change log:

  1. Incorporates counter measures for a phenomenon in which the bottom part of still images recorded to SanDisk CFast cards become corrupted.
  2. Enhances communication reliability between the camera and CFast cards.

If you are using the affected CFast cards, after having updated the camera firmware to Firmware Version 1.0.2, please make sure to use the camera to format the CFast card.
The Version 1.0.2 firmware being released at this time is for cameras with Firmware Version 1.0.0. If the camera’s firmware is already Version 1.0.2, it is not necessary to update the firmware.

<Cautions in the Use of SanDisk CFast Cards>

Please note that when using the SanDisk CFast cards listed below with the EOS-1D X Mark II, the bottom part of still photos may become corrupted.

Affected CFast Cards:

– SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxx)
– SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxx)
– SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxxA)
– SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxxA)
– SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxxB)
– SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxxB)

*The “xxx” at the end of the product number varies depending on the sales region.

When using the affected CFast cards with the EOS-1D X Mark II, follow the steps below.

1: Check whether the firmware version of the EOS-1D X Mark II is Version 1.0.2 or later. If the firmware version of the camera is Version 1.0.0, update the firmware to Version 1.0.2 or later.
2: Format the affected CFast card with the EOS-1D X Mark II with firmware version 1.0.2 or later.

Note that when using a CFast card formatted according to the above step 2, the following operations will take place.

– An “ImgSaver.bin” file of several MB in capacity will be created in the “MISC” folder on the card. Do not move or delete the folder or the file on the card.
– When opening the card slot cover, the access lamp may remain lit or blink for a longer duration.

Remove the card only after having confirmed that the access lamp is off. When the access lamp is lit or blinking, recording to the card is in progress.
Never perform the operations below when the access lamp is lit or blinking as doing so may result in corrupted image data or may cause damage to the card or the camera.

– Removing the card
– Removing the battery pack
– Applying vibration or shock to the camera
– Unplugging and replugging the power cord (when using the separately-sold household power outlet accessories)

When using SanDisk CFast cards, to fully utilize the card performance, use the refresh tool provided by SanDisk before formatting the card with a camera with the above step 1 applied.
Refresh tool: http://kb.sandisk.com/app/answers/detail/a_id/17370
In addition, if an affected SanDisk CFast card has already been formatted with a computer or another device, please format the card again with a camera with the above step 1 applied.

About the “Refresh Tool” of SanDisk cards:

Q1: Whenever the camera is used to format a SanDisk CFast card, is it mandatory to use the refresh tool? If the refresh tool is not used, will the bottom part of still images become corrupted?
A1: The refresh tool is not related to image corruption that appears at the bottom part of still images. We are informing users about this tool as SanDisk recommends regular use of the refresh tool when using SanDisk CFast cards. For details about the use of the refresh tool, please inquire with SanDisk.

Q2: How often does the refresh tool have to be used?
A2: For details about use frequency, and the use of the refresh tool, please inquire with SanDisk.

Q3: What will happen to camera operations if I continue using a SanDisk CFast card without using the refresh tool?
A3: The speed for continuous data writing may decrease. If the data writing speed seems to have decreased during high-speed continuous shooting, please try to use the refresh tool to alleviate the problem. For any other technical questions concerning CFast cards, please inquire with SanDisk.

Download

Purchase options: Adorama | B&H | Amazon


Fujifilm Announces New Firmware Update For X-Pro2

FUJIFILM X-Pro2

Press Release

Valhalla, N.Y., July 7, 2016 – As a leader in advanced digital camera technology and outstanding image quality, FUJIFILM North America Corporation today announced a new Firmware Update Version 2.0 for the FUJIFILM X-Pro2 that includes improvements to the autofocus system, compatibility with the new FUJIFILM EF-X500 flash, new power management options and a more accurate and easier-to-use Optical Viewfinder.

Firmware Update V.2.0 Key Features:

1. The new autofocus algorithm* (found in the new FUJIFILM X-T2) produces faster and more accurate autofocus.
* Excludes the new AF-C Custom Settings functions.
2. Compatibility with the new hot-shoe mount FUJIFILM EF-X500 flash. The camera will now supporthigh-speed flash sync and multi-flash lighting.
3. AUTO POWER OFF will now have 15 second, 30 second, and 1 minute options, allowing more customizable power management.
4. The parallax correction function will be improved to provide a more accurate and easier-to-use Optical Viewfinder.

Availability

The new firmware will be available for download in October 2016.


FUJIFILM X-Pro2 Purchase options: Amazon | Adorama | B&H


Fujifilm XF Lens Roadmap 2016

Fujifilm Lens

Fujifilm has announced an updated roadmap for developing interchangeable lenses for the X Series line of mirrorless digital cameras. The latest roadmap adds three new lenses: the compact, lightweight and stylish semi-wide angle lens XF 23mmF2 R WR, the compact mid-telephoto lens XF 50mmF2 R WR and the mid-telephoto 1:1 macro lens XF 80mmF2.8 R LM OIS WR Macro. The expanded 25-lens lineup covers extensive angles of view from ultra-wide angle to ultra-telephoto, and will now expand the macro category to further enhance photographic versatility.

Changes from the previous roadmap released in February 2015

The XF 120mmF2.8 R Macro lens, listed in the previous roadmap, has been replaced with the XF 80mmF2.8 R LM OIS WR to meet the market demand for compact and lightweight lenses.  To support our customers who were expecting a telephoto macro lens, this new lens is compatible with the existing teleconverters to extend its reach into the telephoto range.FUJIFILM XF Lens Roadmap 2016

Fujifilm X-T2

FUJIFILM X-T2 with Drive

Product Summary

  • Model name: FUJIFILM X-T2
  • Release Date: July 7, 2016
  • Focus Type: Autofocus / Manual
  • Format : APS-C / Crop Sensor
  • Mounts: Fuji X
  • Color: Black
  • Availability: September 2016
  • Price:
    • FUJIFILM X-T2 Body only $ 1,599.95
    • FUJIFILM X-T2 X and XF18-55mm (27-84mm) kit $ 1,899.95.
    • FUJIFILM EF-X500 Flash $449.99.
  • Purchase options: Adorama | B&H | Amazon

Key features

  • 24.3MP X-Trans CMOS III Sensor
  • Dust and moisture-resistant body with approximately 63 points of weather sealing; Freeze resistance to 14°F
  • X-Processor Pro
    – Fast AF of 0.06 seconds
    – Startup time of 0.3 seconds
    – Shutter time lag of 0.045 seconds
    – Shooting interval of 0.17 seconds
    – Phase detection AF and motion predictive AF for continuous shooting up to 8 frames per second (fps)
    – Up to 11fps using Booster Grip
  • High-precision 0.48-inch, 2.36 million dot OLED viewfinder
    – Viewfinder magnification for digital cameras of 0.77x
    – Wide viewing angle (diagonal 38° and horizontal 31°)
    – Ultra-fast Real Time Viewfinder with a lag-time of 0.005sec (less than 1/10 of existing models)
    – Automatic Brightness Adjustment function
    – EVF refreshes at a rate of 60fps, or as high as 100fps in the Boost mode
    – Continuous shooting of 5fps in Live View
  • Full 4K 3840×2160 30P/25P/24P shooting (Using a card with the UHS Speed Class 3 or higher)
    – Continuous recording: up to approximately 10 minutes
    – Full HD 1920×1080 60P/50P/30P/25P/24P, Continuous recording: up to approximately 15 minutes
    – HD 1280×720 60P/50P/30P/25P/24P, Continuous recording: up to approximately 29 minutes
  • Four different display modes: Full, Normal, Dual and Vertical
    – Full mode: Displays shooting information at the top and bottom of the screen to avoid obstruction of the view
    – Dual mode: Adds a small second screen for checking focus point with Focus Peak Highlight or Digital Split Image
    – Normal mode: Lets you concentrate on framing the shot in Auto Focus mode while keeping you aware of how the shooting conditions are changing, making it the perfect setting for sports and action photography
    – Portrait mode: When in Full or Normal modes, it rotates the shooting information interface when the camera is turned vertically
  • Tempered glass 1.04 million dot high-precision 3” tilting LCD monitor
  • Digital Split Image and Focus Highlight Peaking
  • Wi-Fi and remote camera operation
  • ISO200 – 6400, extended ISO 100, 12800, 25600, Auto(maximum ISO setting from ISO 400 – ISO6400 available) with High ISO 51200 setting
  • Lens Modulation Optimizer technology maximizes each lens’ performance
  • In-camera RAW converter
  • Die-cast magnesium body provides a sturdy and durable, while compact and lightweight design
  • Two command dials and six Function buttons for instant control and customization
  • Interval timer shooting for Time Lapse photography is available with intervals of 1 second to 24 hours and up to “∞” frames
  • Advanced filters and Film Simulations, including ACROS

Overview

Features

FUJIFILM X-T2, a splash-resistant premium interchangeable lens camera with a large OLED electronic viewfinder (EVF). The X-T2 houses the latest generation 24.3MP X-Trans CMOS III with an APS-C sensor with no low-pass filter, boasting the highest performance in the history of X Series. The new X-T2 produces crisp image resolution comparable to that of cameras equipped with larger sensors and higher pixel counts, all in a more compact and classically-designed body.

And for the first time, the new FUJIFILM X-T2 now supports 4K video recording that can use each available Film Simulation mode, including ACROS, to easily produce premium-quality footage that is as unique as the photographer behind the viewfinder.

Dramatic improvement to auto focus system The FUJIFILM X-T2 receives a dramatically improved auto focus system (AF) that increases the overall single AF points to 325, and the number of Zone focusing points to 91 (expanded from 49 in previous models). Approximately 40% of the imaging area (center area containing 49 focusing points) is covered with phase detection auto focus pixels to form a fast and precise phase detection auto focus area that can be used in a variety of scenes.

With the high-speed X-Processor Pro and the use of improved algorithms, the X-T2 now refocuses more frequently, enabling predictive AF of advanced accuracy.

The X-T2 also has an enhanced ability to autofocus on small points of light, low-contrast objects and subjects with fine and delicate textures such as bird feathers and animal fur.

The X-T2’s performance of contrast detection AF, enabled for approximately 65% of the imaging area, has also been improved. The data read speed has been doubled compared to previous models to achieve AF performance of higher speed and precision. Photographers will enjoy accurate focusing is all shooting situations, even in low light with a -3EV.

Another area of improvement is the AF-C algorithm that has been significantly enhanced for even higher accuracy when focus-tracking moving subjects in the AF-C mode. According to the type of movement, users can choose individual settings for Subject Retention Characteristic, Acceleration / Deceleration Tracking Characteristic and Focus Zone Characteristic, or select one of five presets or customize specific settings for these three elements.

Image Quality
Fujifilm’s commitment to superior image quality remains a guiding principle, and the FUJIFILM X-T2 is the latest effort to deliver outstanding picture resolution, all from a compact and sophisticated body that is both weather-sealed and easy to travel with in any location. With Fujifilm’s proprietary image design technology, produced through the development of photographic films, the X-T2 reproduces warm skin tones, bright blue skies and rich green foliage in beautiful colors, just as you remember seeing in real life. The X-T2 includes the ACROS Film Simulation for smooth gradation, deep blacks and beautiful textures to create monochrome images that far outperform even the most demanding expectations.

The X-T2 also has the Grain Effect function for reproducing distinctive graininess seen in photographs taken with film cameras. The function is available in Strong and Weak options, and can be combined with any of the Film Simulation modes. You can easily obtain the effect of film-based photos, notable especially when the image is printed out.

Speedy throughout
Basic response specifications, such as startup time, shooting interval and shutter release time lag, have all been improved to the extreme in pursuit of a camera that operates exactly as the photographer demands. The high-speed processing power and the use of improved algorithms have significantly improved the basic autofocus performance, and X-T2 now gives users AF-C Custom Settings for even higher accuracy in focus-tracking moving subjects.

The X-T2’s electronic viewfinder, which is used to continuously track a moving subject, is capable of displaying up to 100 frames per second, while also maintaining the magnification ratio of 0.77x and the display time lag of 0.005 seconds. The duration of the viewfinder blackout, in which the evf blacks out temporarily while the camera reads picture data, has been reduced by more than half, enabling continuous shooting to ensure tracking subject movements.

Body and grip offer ultimate stability
The X-T2’s body is fully made of magnesium alloy making it not only compact and lightweight, but also solid and highly durable. The X-T2 body has weather-proofing at 63 points to achieve a high level of resistance to dust and moisture, and coupled with its ability to operate in temperatures down to 14°F, is ready for full-fledged field photography. Similar ruggedness is applied to the new Vertical Power Booster Grip.

The Vertical Power Booster Grip (optional VPB-XT2) is a dust-resistant grip, rugged and capable of operating at temperatures as low as 14°F that maximizes the performance of the X-T2 beyond expectations. It fits two batteries, bringing the total number of batteries the X-T2 can use to three, including the one in-camera, to increase the maximum number of frames that can be taken per charge to approximately 1,000 (Normal mode). In the Boost mode, multiple batteries can operate at the same time to give a boost to camera performance in continuous shooting, shooting interval, shutter release time lag and blackout time, while also extending the duration of 4K video recording to approximately 30 minutes.

The Vertical Power Booster Grip also features a shutter release button, focus thumbstick, AE-L button, AF-L button, command dials, Q button and Fn button and headphone jack to enable audio monitoring during video recording to provide the same level of excellent operability in vertical shooting as you get in horizontal operation. The grip itself has battery-charging functionality where by using the AC adapter supplied (AC-9VS), users can fully charge two batteries at the same time in about two hours.

FUJIFILM X-T2 Accessories:

  • Vertical Power Booster Grip (optional VPB-XT2) New
  • X-T2 Metal Hand Grip (MHG-XT2) New
  • X-T2 Bottom Leather Case (BLC-XT2) New
  • X-T2 Cover Kit (CVR-XT2) New
  • NP-W126S Rechargeable Battery New
  • Five dedicated flash models to choose from depending on requirements (EF-X500 New, EF-X8, EF-X20, EF-20, EF-42)
  • Battery Pack EF-BP1, compatible with EF-X500 New
  • Protective Filters (PRF-39, PRF-52, PRF-58, PRF-62 and PRF-72)
  • M Mount Adapter for additional lens compatibility
  • Remote Release (RR-90)
  • Stereo Microphone (MIC-ST1)

 

Product Images

FUJIFILM X-T2FUJIFILM X-T2 - frontFUJIFILM X-T2 - topFUJIFILM X-T2 - LCD (Back)FUJIFILM X-T2 - with flash

Purchase options

Adorama | B&H | Amazon

Fujifilm EF-X500 Flash

FUJIFILM X-T2 - with flash

Product Summary

  • Model name: FUJIFILM EF-X500
  • Release Date: July 7, 2016
  • Color: Black
  • Availability: September 2016
  • Price: $449.99.
  • Purchase options: B&H

Key features

  • Maximum guide number of approximately 50 (ISO100・m) / 164 (ISO100·ft) • Zooming the illumination angle for the focal lengths of 24mm – 105mm, and covering the illumination angle of approximately 20mm when the wide panel is used
  • Flash head that can be tilted up by 90° degrees, down by 10° degrees, to the left by 135° degrees and to the right by 180° degrees for bouncing light
  • Equipped with LED video light that can also be used as AF assist light and catch light
  • Registers up to ten combinations of various setting to suit specific shooting conditions in advance for quick activation when needed

Features

The new high-end multi-function external FUJIFILM EF-X500 Flash is now official for the lineup of accessories for the X Series of digital cameras. The EF-X500 is a hot-shoe mount flash with a maximum guide number of approximately 50, and includes support for the FP mode (high-speed flash sync) so that the flash can be fired at any shutter speed. Photographers can now concentrate on shooting when a faster shutter speed is required, for example, in order to use a near-maximum aperture to produce beautiful bokeh.

The EF-X500 also supports multi-flash lighting. Users can set up multiple flashes to freely control light on a subject and background for a creative result. Through-the-lens (TTL) lighting control is available with single flash and also in the multi-flash setup, so that users can start shooting without having to make cumbersome adjustments to light output.

Purchase options

B&H